Crest Electronics CDVS-5400 SERIES, User Manual, Page: 46 / 55

-46-
CDVS-5400 SERIES DVR
8.2 How to use
1. Setup
a. Run the emergency agent program.
b. Click right mouse button on the tray icon ‘
‘, then press ‘setup’.
c. Setup Screen appears like following picture. Choose the messenger option.
• Run agent at windows start : Start emergency agent program whenever
windows starts
• Always on top of the desktop : Emergency agent screen always displays
on top of the desktop.
• Beep on alarm : ‘Beep’ sound comes out when event occurs.
• Show messenger : Shows messenger windows when program starts.
* Network : Check the network line status periodically by the interval
setting and displays the status on emergency agent window with three
kind of pictures as follows.
2. Add DVR’s remote site information
a. Double click the tray icon on the task bar.
b. Click ‘Add’ button then input the information (site code, name, IP address, emergency port) then click
‘Save’ button.
Normal network Link
Physically Disconnected
Sensor event occurred
3. Edit DVR’s remote site information
a. Click right mouse button on the site code you want to edit.
b. When you finish edit, press ‘Save’ button.
The information(site code, site name, IP address is shared with the center DVR’s information. This means that
Center & DVR’s remote site references same information. If one’s data changed, the other one’s data will be
updated automatically.