manualshive.com logo in svg

Cress E18, Owner'S Manual, Page: 6 / 28

Share
Download
Cress E18 Owner'S Manual Download Page 6

6

THE CRESS ELECTRONIC CONTROL

The Cress Electronic Control is easy to use and includes advanced features which give great flexibility in firing schedules. 

It displays the internal kiln temperature throughout the firing and cooling process, so you can easily monitor the progress of 

your firing.

 

The control is a microprocessor based programmable ramping control which will run either  preprogrammed firing 

profiles, or your own user designed custom profiles. It has five preprogrammed firing speed profiles, an optional user selected 

alarm setting, program preview, pyrometric cone-temperature equivalent file, and an LED display that can be selected for 
either 

°

F (Fahrenheit) or 

°

C (Celsius) temperature read out and operation.

 

This control also has self diagnostics that help safeguard the equipment as well as the ware being fired.  It will alert 

you to problems and help in failure diagnosis with the use of error codes that are displayed in the LED window.

 

There are two basic modes of operation; The CONE FIRE  mode, which uses preprogrammed firing profiles, and 

the RAMP HOLD mode, which allows you to create and use custom firing profiles.

CONTROL KEYS OVERVIEW

 

The following is a list of the control operating keys on the control touch pad along with a brief explanation of their 

functions.

 

10 KEY TOUCH PAD WITH ENTER KEY - used to input user selected program variables.

 

START KEY - used to start a firing profile.

 

STOP KEY - used to stop a firing profile.

 

PREVIEW KEY - used to display program or firing information. (varies with mode of operation)

 

°

F or 

°

C SELECT KEY - used to select the temperature scale the control operates in.

 

CONE TABLE KEY - used to look up the temperature equivalent of a pyrometric cone.

 

RAMP HOLD KEY - used to select or to create a custom firing profile.

 

CONE FIRE KEY - used to select a preprogrammed firing profile.

 

FAST KEY - used to select the fast CONE FIRE profile.

 

MED-FAST KEY - used to select the medium fast CONE FIRE profile.

 

MED KEY - used to select the medium CONE FIRE profile.

 

MED SLOW KEY - used to select the medium slow CONE FIRE profile.

 

SLOW KEY - used to select the slow CONE FIRE profile.

 

ALARM KEY - used to insert a user selected alarm point. ( temperature )

SETUP, INFORMATION & OPTION KEYS

°

F or 

°

C SELECT

 

To change the temperature units the control is operating in press the 

°

F or 

°

C SELECT key. The display will read 

CHG

°

.  Pressing the ENTER key will toggle the setting between Fahrenheit and Celsius.

CONE TABLE

 

The cone table is a list of pyrometric cone temperature equivalents.  To look up a cone temperature, press the CONE 

TABLE key.  The display will flash CONE and a number.  Use the key pad to select the desired cone number (cone # 022 

through cone # 10), then press the ENTER key. The display will flash the cone temperature then return to the IdLE condi-

tion.

PREVIEW

 

The PREVIEW key is used to review the parameters of the program that is currently in memory (the program that will 

be running if the START key is pressed ).  Simply press the PREVIEW key and the display will scroll through the program 

Summary of Contents for E18





























Reviews:

No comments