4
IMPORTANT SAFEGUARDS!
Please read and observe the following safety warnings before operating your kiln:
1. Install kiln 18" or more from any wall or combustibles.
2. Fire only on stand or legs furnished.
3. Never fire hotter than cone 10 or 2350
o
F.
4. Do not fire hotter than the manufacturer’s recommendation for your clay, glazes, or decals, or per-
manent damage may result to your kiln or ware.
5. Do not open lid until kiln has cooled.
6. Before opening lid, turn off all switches, then carefully open lid and test that lid brace is securely
engaged before allowing lid to stand freely.
7. Do not leave kiln unattended while firing.
8. Never use an extension cord.
9. Operate kiln only in a well ventilated room.
10. Unplug kiln before servicing or cleaning.
11. Dangerous Voltage - Do not touch heating elements with anything.
12. Do not touch hot sides of kiln or hot lid. Burns may result.
14. Never store anything under kiln; never lean objects against kiln.
15. Do not store or use flammable liquids or sprays in the same room with your kiln.
16. Do not store or use your kiln outside; keep rain and moisture away from kiln.
17 Do not use kiln if cord is damaged.
18 Wall receptacle must not be corroded.
19. Use kiln only with adequate electrical supply and with the correct voltage, amperage and correct
fuse size (not too large or small). Be sure the wire size is large enough (avoid aluminum wiring). Do
not use a 208 volt kiln on 220 volts.
20. Kiln must be grounded properly.
21. Wear goggles when looking thorough peephole.
22. Wear protective gloves when handling hot peephole plugs.
23. When firing objects to be used with food and drink, use only supplies tested and labeled “safe” for
such purposes.
It is imperative that you read all instructions before operating the kiln.