WEEKLY CLEANING PROCEDURE
PSL50 Series
Step 3: Clean spout adaptor, steam traps
01
02
03
Disconnect ingredient spouts
from spout adaptor. Keep tubes
connected to mixers/brewers for
now.
Pull spout adaptor forward to
separate it from support arm.
Wash spout adaptor under
running water and scrub any dried
coffee/ingredient residue with a
brush to remove it. Dry after
washing. Reassemble in reverse
order.
Pull steam trap straight up to remove
it from mixer (repeat for each mixer.
Wash all parts under running water
and scrub any dried coffee/ingredient
residue with a brush to remove it.
Dry after washing. Reassemble in
reverse order.
Pro Tip:
Save time by exchanging dirty
parts with clean spares and
washing and drying the dirty
parts later (in a dishwasher if
dishwasher-safe) then reusing
them during the next weekly
cleaning.
13
