ONE
22
Original instructions.
Pro Tip:
After brewing your espresso, you can skip the Shot screen by pressing any button (K1 - K4) on
the touchpad.
On Barista menu, access to Shot screen (figure 21) settings.
Adjust the time that the brewing timer stays on the display after the brewing process is finished.
On LFPP machines, the volume accounted by the flowmeter will be shown as well on the display.
Use the arrows (figure 6 & 7) to adjust each setting. Then use the icon (figure 8) to confirm.
· Shot timer adjustment
USER PROGRAMMING 2B
Figure Icon
21
6
▲
7
▼
8
On Barista menu, access to Counters settings (figure 22).
Use the following steps to access to the machine total counters and to the Cleaning/Service partial counters:
Total counters (figure 23): Shows the total number of shots brewed on the group. Adds 1 per each shot (no
difference between single or double shot)
Cleaning/Service partial counters (figure 24): Shows the partial counters used to trigger the Cleaning/Service
alarms.
To reset the partial counter:
Press on (figure 25) icon
Then use the arrows (figure 6 & 7) to select each counter.
Keep pressed (figure 25)) for 5 sec to reset the partial counter.
Pro Tip:
The counters can be useful for calculating the number of coffees dispensed over a day, week or month, which
is helpful in calculating expenses, when machine cleaning or service is needed, and other important machine related
information.
Note
:
Service/Cleaning alarms settings will be
adjusted on Technical menu.
Note
:
Volume related counters will be
available on LFPP machines only.
i
i
· Counters menu
Note
:
Brewing cycles below 5 seconds won’t be
accounted.
i
Figure Icon
22
23
001
24
25
6
▲
7
▼
Pro Tip:
The Auto On/Off function is useful for programming the machine to be warmed up and ready
before the first barista arrives at the start of each day, and saves energy by making sure the machine is
shut down automatically at the end of each day.
On Barista menu, access to Auto On/Off (figure 17) settings.
Use the following steps to activate or deactivate this function and adjust the daily time the machine turns Off
and the time the machine turns on:
Activate and deactivate Auto On/Off function by choosing between Disable (figure 19) and Enable (figure 20)
When activated, daily On and Off times can be programmed individually for each weekday.
Use the arrows (figure 6 & 7) to adjust each setting. Then use the icon (figure 8) to confirm.
· Auto On/Off menu
Figure Icon
17
19
20
6
▲
7
▼
8
