2 of 7
LPN00620X0002A1_B
NEMA
®
7-PIN PHOTOCELL
RECEPTACLE
NOTE:
Dimming capabilities are accessible
through the NEMA
®
7-Pin receptacle when
used with a photo control with dimming
capabilities.
STEP 1:
Rotational adjustment of the photo control
is
tool-less.
STEP 2:
Engage/install photo control into NEMA
receptacle on top of the fixture. If no photo
control will be used with luminaire install
customer supplied shorting plug into
receptacle.
STEP 3:
Firmly rotate photo-control with its
photo-eye approximately in the ‘N’ north
direction. Some photo-controls operate best
somewhere between NW and NE.
FIELD ADJUSTABLE DIMMING
(OPTIONAL)
NOTE:
This luminaire may be provided
with field adjustable dimming. Luminaires
leave the factory adjusted to the maximum
setting specified when ordered. Visit www.
creelighting.com/products for the product
specification sheet for lumen and power
multipliers for each field adjustable output
dim setting.
STEP 1:
The Dimming module is located inside the
luminaire. Open the cover by loosening the
captive D-ring and allow the cover to swing
open.
STEP 2:
Establish the desired input power multiplier
by referring to the product dimming spec
sheet and turn the switch to the correlating
position. For the half moon shaped dial the
center of the flat side should be turned to
the desired setting. See
Figure 4.
NOTE:
The Utility Option will be limited to
the highest setting ordered.
STEP 3:
Close the cover ensuring no wires are
pinched.
TORQUE VALUES
Pipe
Size
Pipe Position
Bolt Torque
Required (in-lbs)
Bolt Torque
Required (N-m)
1.66 in O.D.
+5.0 degrees tilt
200 +/-30
23 +/-3
+2.5 degrees tilt
200 +/-30
23 +/-3
0 degrees (no tilt)
200 +/-30
23 +/-3
-2.5 degrees tilt
200 +/-30
23 +/-3
-5.0 degrees tilt
200 +/-30
23 +/-3
2.38 in O.D.
+5.0 degrees tilt
200 +/-30
23 +/-3
+2.5 degrees tilt
200 +/-30
23 +/-3
0 degrees (no tilt)
200 +/-30
23 +/-3
-2.5 degrees tilt
200 +/-30
23 +/-3
-5.0 degrees tilt
200 +/-30
23 +/-3
4
