CREATOR CHINA
2013-09
WWW.CREATOR1997.COM
13
WiFi Conference System U
ser„s Manual
①
POWER
The power indicator: the power indicator lights up
when it is normally powered, in reverse, the
indicator won‟t be lit.
5GHz
5GHz wireless network signal indicator, when the
5GHz wireless network signal is passing through,
the light flashes, suggests it is sending or
receiving signal.
2.4GHz
2.4GHz RF wireless digital audio signal indicator,
when the 2.4GHz RF wireless digital audio is
opened, the indicator is lit and flashes.
LAN
Ethernet signal indicator, when the Ethernet
signal is passing through, indicator is lit, says it is
sending or receiving signal.
②
5GHz antenna
Provide a pair of 5GHz free rotation antenna to
adjust the best sending or receiving range.
③
DC 48V
The DC power input port, the controller supports
DC 48V power input.
④
CONSOLE
The control port, preserved
⑤
LAN(PoE)
Ethernet port, used to connect the WIFI
conference controller or network switcher.
⑥
RESET
The reset button, press the reset button for about
10 seconds, the access device would be reset to
factory default configuration.
The reset button will remove all settings
and return to the default value, including all
the wireless security and the IP address. The
reset IP address is 192.168.0.50, user name:
admin, password is empty.
⑦
Ground wire interface
⑧
AUDIO
Balanced audio input port, used to connect the
conference controller.
⑨
AUDIO ON/OFF
AUDIO ON/OFF is used to open or close the 2.4G
RF wireless digital audio of the wireless AP
