Details 1
Details
Sound Blaster
PCI128
This insert contains specific information for your Sound Blaster PCI128 audio card, any last minute information, and
contact information for Creative Labs.
Refer to your
Getting Started
manual, “Installing Your Audio Card” on page 1, for installation instructions for your
audio card.
The illustration below identifies the audio card’s features.
TAD/Modem
Audio I/O
CD Audio
Input
Joystick/MIDI connector
Line In Jack
Microphone Jack
Line Out (Front) Jack
TV/IDE Audio
Input
1
3
2
4
5
6
8
Auxiliary In/Line
Out (Rear) Jack
7
NOTE:
To use passive speakers with your Sound Blaster PCI128, you must
first enable the audio card’s amplifier by setting the jumpers located just
behind the Line Out (Front) jack. If the amplifier is disabled (default), the
jumpers cover the lower two sets of pins as shown in the circled illustration
above. To enable the audio card’s amplifier, move the jumpers to cover the
upper two sets of pins as shown in the illustration to the right above.
Amplifier
disabled
Amplifier
enabled