6
Setup Recommendation
The Sonic Carrier main unit is designed to be placed on top of a console in front of a TV or wall mounted. For optimum performance,
please observe the setup recommendation below. Wall mount information for Installers are included in the appendix at the end
of the manual.
1. In order to reproduce an immersive sound experience, the Sonic Carrier main unit radiates sound from the front, top and sides.
Ensuring that these sound waves are not obstructed by objects placed in their path would yield the best sound experience.
Do not place your Sonic Carrier within an enclosed fixture (cabinet, shelving unit, etc.), and make sure nothing is obstructing
the sides. The top firing speakers needs to have a clear line of sight to the ceiling as well.
2. Avoid positioning the Sonic Carrier so low that you are looking down at the top of the main unit, as this will disrupt the audio
and surround sound performance. If you are wall mounting the main unit, install the main unit with 15cm of space between
the top of the main unit and the bottom of the TV to avoid obscuring the top firing speaker.
3. For the best listening experience, the listening position should be at least 1.2 - 1.5m (4 - 5 ft) away from the Sonic Carrier.
4. The subwoofer unit produces non-directional sound and thus could be placed at your convenience around the room.
For optimum results, it would be best to locate the subwoofer equidistant to the main unit when measured from the listening
position, and to keep the subwoofer within 3m (10ft) of the main unit.
5. The subwoofer is equipped with a pair of ports that augments the sound output of the dual subwoofer drivers at the lowest
frequencies. Keep a distance of 10cm (4”) between the rear subwoofer enclosure and the adjacent wall to avoid turbulence
or air chuffing noises.
6. Room acoustics has a major influence on sound quality. The ear is particularly troubled by standing waves and echoes which
can be identified by moving around your room and loudly clapping your hands. Parallel surfaces such as opposite walls,
floor and ceiling encourage and sustain these problems. However, rearranging curtains, thick carpets, rugs, furniture and
bookcases can make a dramatic improvement as the sound waves are partially absorbed and diffused. As far as possible,
the Sonic Carrier main unit should be setup with equal distance from the left and right wall.
The Sonic Carrier uses side firing drivers to reproduce surround information; excessive or asymmetric amount of absorption
on the left and right sidewalls could adversely affect the surround sound performance. Or best results, keep the area of the left
and right walls between the main unit and the listening position free from absorptive material such as curtains and upholsteries.
7. The ceiling surface is an important contributor to how overhead (height) effects performs. The ideal ceiling height is between
2.3 - 4.3m (7.5 - 14ft). Ceiling should be constructed of an acoustically reflective material, such as wall board, plaster, hardwood,
or any rigid, non-sound absorbing material. Avoid treating ceilings with acoustic damping materials. For optimal playback, the
ceiling should be flat. A shallow vaulted ceiling will provide an acceptable performance. Chandeliers and can-style lighting
do not significantly interfere with or negatively impact the height effect.
Care for your Sonic Carrier Main Unit & Subwoofer
Cabinet
The Sonic Carrier main unit is finely crafted to last a lifetime from select metal alloys and engineering polymers; and should be
treated as you would fine furniture with similar materials and finishes.
The cabinet of the Sonic Carrier subwoofer is finely crafted from wood finished in vinyl laminate or high gloss lacquer; and should
be treated as you would furniture with similar materials and finishes.
Dust lightly with a soft lint-free cloth, avoiding abrasives and spirit based cleaners. If necessary, wipe carefully with a cloth slightly
dampened with glass cleaner to remove stubborn soil and marks.
Main Unit Grilles
The acoustically transparent fabric midrange driver grilles help protect the driver uits, and could be left in place during listening
with negligible acoustic effect. These could be taken off and cleaned using a lint brush. Should you choose to clean the grilles in
place, be careful not to press in and deform the drivers under the grille. Optional décor rings without fabric covers are provided
as a alternative to users who prefer the look of exposed midrange drivers. Take care to properly seat the décor rings on the rubber
isolation rings that holds the pre-installed fabric grilles in place.
Subwoofer Grilles
The acoustically transparent fabric grille protects the subwoofer driver units, and must not be removed. This could be carefully
cleaned using a lint brush, be careful not to press in and deform the drivers under the grille. The space between the grille and
the cabinet could be dusted very carefully with a soft dry brush. Avoid touching the woofer diaphragm.
Main Unit Drivers
Avoid touching the speaker diaphragms, particularly tweeters. The surface of the midrange driver could be dusted very carefully
with a soft dry brush.
Main Unit Display
The main unit display on the top panel can be tilted to your desired angle with minimum force. Do not force the display to swivel
further forward than 90 degrees vertical.
Front Panel
The front panel connectors are concealed by a magnetically latched flap that is hinged at the bottom. Avoid applying excessive
force to the flap; close the flap when access to the ports are not required, or when the unit needs to be moved. When tilting the
main unit forward to facilitate cable connection, remove all cables and USB devices first and ensure the front panel flap is closed
to avoid damage to the connectors and the flap hinge.
General Care Information
Avoid damp, direct sunlight and temperature extremes. The ventilation and ports should not be impeded by covering the
ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles,
should be placed on the apparatus
Setup and Care Information
