D-4 Troubleshooting
❑
The Original Sound sliders in either the Master and Source tabbed pages of the Environmental
Audio applet are set at or near 0%.
Check the following:
❑
The speakers’ volume control knob, if any, is set at mid-range. Use Creative Mixer to adjust
the volume, if necessary.
❑
The powered speakers or external amplifier are connected to the card’s Line Out or Rear Out
jack.
❑
No hardware conflict between the card and a peripheral device. See “Resolving I/O Conflicts”
on page D-7.
❑
The Speakers selection in the Environment deck of Surround Mixer corresponds to your
speaker or headphone configuration.
❑
The Original Sound sliders in either or both the Master and Source tabbed pages of the
Environmental Audio applet are set to 100%.
No audio output when playing CD-Audio.
OR
No audio output when playing DOS games that require a CD-ROM.
To solve this problem:
•
Make sure the Analog Audio connector on the CD-ROM drive and the CD In connector on
the audio card are connected.
4620r-d.fm Page 4 Thursday, April 8, 1999 4:45 PM
Summary of Contents for SB0060 - Sound Blaster Live
