Creative SB0060 - Sound Blaster Live, User Manual

Page: 87 / 102

SB Emulation in MS-DOS/ Windows 95/98 B-7
The parameters in the command are as follows.
This
Parameter
Specifies
Axxx SB interface’s base I/O address.
Ix IRQ line used by the audio interface.
Dx First DMA channel used by the audio interface.
Hx Second DMA channel used by the audio interface.
Pxxx MPU-401 UART interface’s base I/O address.
Tx Card type. x must be 6.
Determining
Resources To find the current SB Live! SB16 Emulation resources in Windows 95/98:
1. Click the Start button, point to Settings, and then click Control Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab.
4. Double-click Creative Miscellaneous Devices, and then double-click Creative SB Live!
SB16 Emulation.
5. Click the Resources tab.
You can use the information in the resource list to help you configure MS-DOS games for use
with the SB Live! card.
The resource list may show three entries of “Input/Output Range” and two entries of “Direct
Memory Access”. They correspond to the sequence of entries in Table B-1 and Table B-3. If the
number of entries do not match, a good estimate of the identity of the device is its I/O address or
DMA channel.
4620r-b.fm Page 7 Thursday, April 8, 1999 4:44 PM