Creative SB0060 - Sound Blaster Live, User Manual

Page: 90 / 102

B-10 SB Emulation in MS-DOS/ Windows 95/98
❑
Sound Blaster Emulation: Port, IRQ, DMA
❑
MPU-401 Emulation (GM, Roland MT-32/LAPC-1) Emulation: Port
❑
Adlib Emulation: Port
The emulation settings appear only if they are enabled.
SBEMIXER.EXE
Use
SBEMIXER.EXE
to change the volume levels of the MPU-401 instrument set used on the SB
Live! card. You can use
SBEMIXER.EXE
from the command line—useful for advanced users
who want to set up batch files with particular volume levels—or within the
SBEMIXER
screen.
The settings for
SBEMIXER.EXE
are independent of the Creative Mixer settings in Windows 95/
98.
To set SBEMIXER values in the command line:
At the DOS prompt, type the
SBEMIXER
command in a single line. Its syntax is:
SBEMIXER [/S: x ] [/W: x ] [/C: x ] [/M: x ] [/?]
where square brackets [ ] denote optional parameters, and:
This
Parameter
Specifies
/S:x Synth volume. x can be a value from the range 0 to 127.
/W:x Wave volume. x can be a value from the range 0 to 127.
/C:x CD audio volume. x can be a value from the range 0 to 127.
/M:x Synth MT-32/LAPC-1 mode. For x, 0 is Off, 1 is On.
/? View a short description of the parameters.
An example of an
SBEMIXER
command is
SBEMIXER /S:64 /W:120 /C:50 /M:0
which corresponds to “set the synth volume to 64, the Wave volume to 120, the CD audio volume
to 50, and turn off the Synth MT-32/LAPC-1 mode”.
4620r-b.fm Page 10 Thursday, April 8, 1999 4:44 PM