D-2 Troubleshooting
Problems With
Sound
There is unexpected excessive environmental sound or effects when an audio file is being
played.
The last selected preset is an inappropriate environment for the current audio file.
To switch to an appropriate environment:
1. Open Environmental Audio control applet.
OR
Display Creative Launcher. It is found at the top or bottom of your screen (you may have
to bring your pointer to the edge of the screen to display Launcher). And then click the
Environments tab.
2. In the Environment list, select “No effects” or an appropriate environment.
No sound from the headphones.
Check the following:
❑
The headphones are connected to the Line Out jack.
❑
In the Environment deck of Surround Mixer, make sure that the Speaker entry is Headphones.
In a 4-speaker configuration, there is no sound from the rear speakers.
Check the following:
❑
The rear speakers are connected to the audio card’s Rear Out jack.
❑
If you are playing sound from one of these sources:
•
CD Audio
•
Line In
•
TAD
•
Auxiliary (AUX)
•
Microphone
If your record source is “What U
Hear”, then of these five sources
you can unmute only one at a
time. Therefore, you can get sound
from the rear speakers only from
the unmuted source.
4620r-d.fm Page 2 Thursday, April 8, 1999 4:45 PM
Summary of Contents for SB0060 - Sound Blaster Live
