2 Live Drive CT4860/CT4861
Your Live! Drive
The front panel of your Live! Drive has these jacks, connectors and controls:
MIDI In/Out connectors
Connects to MIDI devices.
Line In 2/Mic In 2 selector
(Microphone Gain Control)
To switch to Line In 2, turn the knob anti-
clockwise over the Line In 2/Mic In 2 mode
separator mark until a “click” sound is
heard. To switch back to Mic In 2, turn the
knob clockwise over the separator mark
until a “click” sound is heard. To control
the microphone gain, continue to turn
clockwise.
¼" Line In 2/Mic In 2 jack
Allows you to connect to a high-quality
dynamic microphone or audio device such
as an electric guitar, DAT, or MiniDisc player.
RCA Auxiliary In jacks
Connects to consumer equipment
such as VCR, TV and CD player, via
RCA Auxiliary outputs.
Optical SPDIF In/Out connectors
Connects to digital audio devices
such as DAT and MiniDisc recorders,
via optical input/output.
Headphones Volume Control
Controls the headphones
output volume.
RCA SPDIF In/Out jacks
Connects to digital audio
devices such as DAT and
MiniDisc recorders, via
RCA input/output.
¼" Headphones jack
Allows you to connect to a pair of
high-quality headphones. Your
speaker output will be muted when
you connect the headphones.
Figure 1: Jacks, connectors and controls on the Live! Drive.
(These two sets of connectors and jacks are available only on Live! Drive II.)
Line In 2/Mic In 2 mode
separator mark
If a particular INPUT source (for
example, Line In 2) is supported
by the Live! Drive as well as the
Digital I/O card, only the input on
the Live! Drive will be enabled.
However, using the microphone
via the Line In 2/Mic In 2 input on
the Live! Drive will also disable
the Line In 2 input on the Digital
I/O card.
To connect to your existing
computer headphones and
microphone to the Live! Drive,
use the ¼" to 3.5mm adapter
provided.