4 Live Drive CT4860/CT4861
Connecting
Headphones
There are two types of headphones which you can connect to the Live! Drive:
❑
Home audio or professional audio headphones, which are usually fitted with a ¼" stereo plug
.
❑
Personal stereo headphones, which are usually fitted with a 3.5mm stereo plug, such as those
used for portable audio players.
Connecting
Microphone
There are two types of microphone which you can connect to the Live! Drive:
❑
Dynamic microphone, which is usually fitted with a ¼" stereo plug, such as those used in
vocal performances
.
❑
Condenser microphone, which is usually fitted with a 3.5mm stereo plug, such as the Telex
microphone bundled with Creative audio products.
By default, Live! Drive is set for use with a condenser microphone. To use a dynamic
microphone, you must place the shunt (jumper cap) onto Jumper C85 on the Live! Drive. See
Figure 4 on page 8 for the location of Jumper C85 on the Live! Drive.
To listen to an analog source (e.g.
CD Audio) using headphones,
make sure that in Surround Mixer,
the recording source selected is
“What U Hear”. Otherwise, no
sound will be heard from the
headphones.
The shunt for Jumper C85 can be
found together with the packet of
screws provided.
Shunt
Figure 2: Microphone jumper settings.
To use a dynamic
microphone,
place the shunt
onto Jumper C85.
To use a condenser
microphone,
remove the shunt
from Jumper C85
(default setting).
Jumper C85
Jumper C85
Shunt
