background image

OR FOR ANY LOST PROFITS, LOST 
SAVINGS, LOST REVENUES OR LOST DATA 
ARISING FROM OR RELATING TO THE 
SOFTWARE OR THIS AGREEMENT, EVEN 
IF CREATIVE OR ITS LICENSORS HAVE 
BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. IN NO EVENT WILL 
CREATIVE’S LIABILITY OR DAMAGES TO 
YOU OR ANY OTHER PERSON EVER 
EXCEED THE AMOUNT PAID BY YOU TO 
USE THE SOFTWARE, REGARDLESS OF 
THE FORM OF THE CLAIM.
 

Some countries/states do not allow the limitation or 
exclusion of liability for incidental or consequential 
damages, so the above limitation or exclusion may 
not apply to you.

PRODUCT RETURNS
If you must ship the software to Creative or an 
authorized Creative distributor or dealer, you must 
prepay shipping and either insure the software or 
assume all risk of loss or damage in transit.

U.S. GOVERNMENT RESTRICTED RIGHTS
All Software and related documentation are 
provided with restricted rights. Use, duplication or 
disclosure by the U.S. Government is subject to 
restrictions as set forth in subdivision (b)(3)(ii) of 
the Rights in Technical Data and Computer 
Software Clause at 252.227-7013. If you are sub-
licensing or using the Software outside of the United 
States, you will comply with the applicable local 
laws of your country, U.S. export control law, and 
the English version of this Agreement.

CONTRACTOR/MANUFACTURER
The Contractor/Manufacturer for the Software is:

Creative Technology Ltd
31, International Business Park
Creative Resource
Singapore 609921

GENERAL
This Agreement is binding on you as well as your 
employees, employers, contractors and agents, and 
on any successors and assignees. Neither the 
Software nor any information derived therefrom 
may be exported except in accordance with the laws 
of the U.S. or other applicable provisions. This 
Agreement is governed by the laws of the State of 
California (except to the extent federal law governs 
copyrights and federally registered trademarks). 
This Agreement is the entire agreement between us 
and supersedes any other understandings or 
agreements, including, but not limited to, 
advertising, with respect to the Software. If any 
provision of this Agreement is deemed invalid or 
unenforceable by any country or government agency 
having jurisdiction, that particular provision will be 
deemed modified to the extent necessary to make the 
provision valid and enforceable, and the remaining 
provisions will remain in full force and effect.

For questions concerning this Agreement, please 
contact Creative at the address stated above. For 
questions on product or technical matters, contact 
the Creative technical support center nearest you.

ADDENDUM TO THE MICROSOFT 
SOFTWARE LICENSE AGREEMENT 
(WINDOWS 95)

IMPORTANT: By using the Microsoft software 
files (the “Microsoft Software”) provided with this 
Addendum, you are agreeing to be bound by the 
following terms. If you do not agree to be bound by 
these terms, you may not use the Microsoft 
Software.

The Microsoft Software is provided for the sole 
purpose of replacing the corresponding files 
provided with a previously licensed copy of the 
Microsoft software product identified above 
(“ORIGINAL PRODUCT”). Upon installation, the 

Microsoft Software files become part of the 
ORIGINAL PRODUCT and are subject to the same 
warranty and license terms and conditions as the 
ORIGINAL PRODUCT. If you do not have a valid 
license to use the ORIGINAL PRODUCT, you may 
not use the Microsoft Software. Any other use of the 
Microsoft Software is prohibited.

SPECIAL PROVISIONS APPLICABLE TO 
THE EUROPEAN UNION

IF YOU ACQUIRED THE SOFTWARE IN THE 
EUROPEAN UNION (EU), THE FOLLOWING 
PROVISIONS ALSO APPLY TO YOU. IF THERE 
IS ANY INCONSISTENCY BETWEEN THE 
TERMS OF THE SOFTWARE LICENSE 
AGREEMENT SET OUT EARLIER AND IN THE 
FOLLOWING PROVISIONS, THE FOLLOWING 
PROVISIONS SHALL TAKE PRECEDENCE.

DECOMPILATION
You agree not for any purpose to transmit the 
Software or display the Software’s object code on 
any computer screen or to make any hard copy 
memory dumps of the Software’s object code. If you 
believe you require information related to the 
interoperability of the Software with other 
programs, you shall not decompile or disassemble 
the Software to obtain such information, and you 
agree to request such information from Creative at 
the address listed earlier. Upon receiving such a 
request, Creative shall determine whether you 
require such information for a legitimate purpose 
and, if so, Creative will provide such information to 
you within a reasonable time and on reasonable 
conditions.

LIMITED WARRANTY
EXCEPT AS STATED EARLIER IN THIS 
AGREEMENT, AND AS PROVIDED UNDER 
THE HEADING “STATUTORY RIGHTS”, 
THE SOFTWARE IS PROVIDED AS-IS 

Summary of Contents for Live! Drive II























Reviews: