Creative XP GlassRaven 4G, User Manual

Page: 16 / 48

16
Introduction
3.2 SD Card Selection
Using a memory card is required to operate the camera. When the camera is
on "ON" mode and no memory card is used, the screen displays "No card".
The SD slot of the camera has a 32 GB memory capacity. Before inserting or
removing the memory card, the camera must be turned "OFF". Failing to do
so may cause loss of or damage to the pictures/videos already recorded on
the memory card. When the SD card is full, the viewing screen shows
"Memory Full". The table below shows an approximated number of photos or
videos which can be recorded by the camera depending on the memory
card capacity.
SD Card
Capacity
5 MP 869 1631 3585
556 1041 2294
391 733 1613
00:05:27 00:10:13 00:22:28
00:03:56 00:07:23 00:16:13
00:02:04 00:03:53 00:00:31
1 GB
Photos
Videos
2 GB 4GB
8 MP
12 MP
640x480
HD
FHD
SD Card
Capacity
5 MP 7492 15307 30936
4798 9794 19795
3371 6887 13919
00:46:57 01:35:56 03:13:52
00:33:53 01:35:56 02:19:56
00:17:48 00:36:20 01:13:21
6 GB
Photos
Videos
8 GB 32GB
8 MP
12 MP
640x480
HD
FHD
CREATIVE XP Solar Panel
To improve our customers’ experience, we specially designed a Portable Solar
Panel for all our cellular trail cameras. We recommend using batteries as a
backup in case the solar panel runs out of power. The sun will not charge the
batteries, but it will charge the solar cell 1500maAH battery which increases
the operating lifetime up to one year.
*The CREATIVE XP Solar Panel plug needs a short adapter cable to connect to
the bottom of the camera. We include this adapter cable in the camera box.
You can find our EGREEN Solar Panel at www.creative-xp.com!
Power adapter - Security Surveillance Purpose
The GlassRaven Camera can also be powered by an external 12V / 2A DC
adapter. We recommend removing the AA size batteries when the power
adapter is used. Electrical power is recommended for security purposes.