Assembly
Pine Skybox
19690-100 Rev J (06-16)
© Copyright 2005, Creative Playthings
Page 17
ASSeMbly InStRuCtIonS
illustration #31
illustration #33
illustration #32
tent Roof Gym
Wood Roof Gym
SteP 20 - long & Short Wall Slats:
Locate the Long Wall Slats (m) and Short Wall Slats (n). These slats are installed in two different ways, depending on whether
they to installed on a Gym with a Tent or Wood Roof. note: Leave no gap larger than 3-1/2" except at entrance or exit points.
tent Roof Gym:
evenly space three Long Wall Slats (m) between the Tent
Post (L) and the right rear Gym Corner Post. The spaces
will be approximately 1-7/8" . Fasten each Long Wall Slat
(m) using five #8 x 1-5/8" Wood Screws.
Place one Short Wall Slat (n) 1-1/2" from the left Gym
Corner Post and another 12-1/4" from the Gym Corner
Post. Center the narrow Wall Slat (P) between the first two.
Fasten each with four #8 x 1-5/8" Wood Screws. Fasten
the Long, narrow Wall Slat (o) 1-1/2" from the Short Wall
Slat, as shown. use five #8 x 1-5/8" Wood Screws
Wood Roof Gym:
Place one Short Wall Slat (n) 2-1/8" from the left Gym
Corner Post and another 12-7/8" from the Gym Corner
Post. Center the narrow Wall Slat (P) between the first two.
Fasten each with four #8 x 1-5/8" Wood Screws.
evenly space four Long Wall Slats (m) between the
center-most Short Wall Slat and the right rear Gym
Corner Post. The Spacing will be approximately 2-1/8".
Fasten each Long Wall Slat (m) using five #8 x 1-5/8"
Wood Screws.
l
M
M
n
1-1/2"
1-1/2"
SteP 21 - Install Access ladder:
Lean the Access Ladder Assembly against the Platform
Support (Z), as shown. Place the angled ends flat against
the Platform Support and Gym Platform boards. mark the
position of the holes in the Access Ladder Rails on the
Platform Support using a pencil.
At the pencil marks, drill 3/8" diameter holes through the
Platform Support. Fasten the Access Ladder Assembly to the
Platform Support using two 5/16 x 2" hex bolt Assemblies.
Fasten the base of the Access Ladder Assembly to the Gym
Platform boards using two #8 x 1-5/8" Wood Screws.
o
P
12-1/4"
n
P
2-1/8"
12-7/8"
