Assembly
NORTHBRIDGE WOOD ROOF
19950-100 Rev C (05-18)
© Copyright 2016, Creative Playthings
Page 11
ASSEMBLY INSTRUCTIONS
STEP 5 – Weld Nuts on Back:
Insert four 3/8" Weld Nuts into the Main Beam at
the back of the tower in the positions shown. Make
sure the threads inside the Weld Nuts are clear as
it may be hard to access the Weld Nuts later.
AC
STEP 6 – Tip onto Back:
With the help of another person, gently tip the assembly
onto its back, with the Weld Nuts facing the ground.
STEP 7 – Step Leg:
Slide the Step Leg (AC) into place between the back
Main Beam and the back Inside Beam as shown. Place
the angled face of the leg flush to the back right Post
and align the holes with the holes in the Main Beam.
Fasten the Step Leg to the back Main Beam with 3/8
x 4-1/2" Hex Bolt Assemblies using the Weld Nuts in-
serted previously.
Right side of the Gym
Right side of the Gym
Back of the Gym
3/8 x 4-1/2" Hex Bolt
3/8" Weld Nut
