Page 2 of 11
eD S10 www.creativelighting.com.au
Description
Congratulations on your purchase of an eDIDIO S10, the modular DALI and DMX
512-A
intelligent lighting controller that
suits standard DIN mounting. The controller allows for 2 lines of control, via either DALI, DMX
512-A
, or a combination of
both.
The controller has the following features.
•
Modular Control
o
Modular hardware allows for any combination of up to two (total) DALI and or DMX
512-A
outputs
while still maintaining proper DMX
512-A
signal conditioning and DALI separation.
•
Open Protocol
o
Creative Lighting embraces open protocols and allows any TCP-IP capable system to interact
with the eDIDIO. Our ‘Protocol Buffers’
-based API enables systems written in most languages to
integrate with the eDIDIO quickly and easily.
•
Easy Installation
o
DIN Mounted with
‘plug and play’
connectors. If the controller is moved or access is required, the
connectors can remain behind, leaving the existing wiring connected.
•
Multi-Line Control
o
Any interface or trigger in the system can call a command over multiple connected lines.
•
Easy to use configuration
o
An easy-to-use interface provides quick configuration access/changes; uniquely, each section is
treated individually so for example, inputs can be programmed without erasing schedules.
•
Spektra
o
Control Freak Spektra has been baked into the eDS10 allowing for sophisticated colour control of
any type of coloured light using DALI or DMX
512-A
.
User-selectable light types of up to 10 colours per light
–
from white to R/G/B/A/WW/CW - for up
to 128 DALI devices, or 1024 DMX
512-A
channels.
*API, Windows-compatible GUI, and Android apps available. IR and RS232 Serial optional
Requirements
The eDIDIO must be powered with a 24vdc (>100mA) source, recommended as a HDR15-24 (minimum) or HDR60-24.
This supply is connected to the eDIDIO supply input screw down terminals marked DC IN + & -. Ensure the cable from
the DC power supply to the eDIDIO is less than 30 meters.
For DALI to work, an external DALI PSU must be present on each line, recommended as a Control Freak UBi Power.
Configuration software available for free on our website
Safety
•
This product is NOT for household use and must only be used by a professional qualified person.
•
This product is designed to be powered by a suitable DC supply 24V
•
Turning connected lights off by DALI or DMX commands does not disconnect the power to the fixtures.
