60
Key Function
Up/Down/Left/Right rotation
Zoom out
Zoom in
Focus near
Focus far
Iris Close
Iris Open
Save Preset
Go to the Preset
Go to OSD main menu
Run Group Tour 1~9
Run Pattern 1~9
To use a mouse in Pan/Tilt mode, please move the cursor to the lower portion near the center of the screen. To use front
button in Pan/Tilt mode, please push setup button.
To activate PTZ control OSD menu, user must move the cursor to the bottom right portion of the screen. A key pad control
will show as follows:
To save current camera number, select Preset No and
button click.
To move to preset, select preset No and
button click.
Available 1 ~ 255 Preset numbers can saved it depends on camera specification.
As explained earlier in
4.4.2.,
press Menu button to pop-up PTZ camera OSD setup screen and set up Tour and Pattern
items.
-
Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD.
-
Once user completes the setup, close the Camera OSD menu.
-
User can conveniently use Tour and Pattern functions simply by clicking Tour and Pattern buttons.
-
Particulars on how to setup each function on OSD Menu are found in the manual of a corresponding camera.
NOTE
Suppose a command for using Tour function is 71 ~ 79 + Preset and if you had set Tour to 70, use Preset No: 1 ~ 9 + Tour
button to benefit the Tour function (70 + 1~9).
NOTE
It is required to set Menu as Preset number 95 from camera in order to call camera menu display by clicking ‘menu’ button or
using 95+Goto button.