30
CAUTION
IF USER USES “Rec Days” FUNCTION, DVR WILL STORE ONLY THE DAYS THAT SPECIFIED BY USER. PLEASE
BEWARE OF DATA LOSS DUE TO “Rec Days” FUNCTION.
NOTE
Notify setting does not affect saving the recorded data. It only gives notification and keep recording until hard disk is full.
NOTE
For more specific setting about Alarm-out, use Setup>DEVICES>Alarm Out.
Clear All Data
Use to delete or purge all normal recorded data from database. Please follow the procedure below.
①
Click (
) Clear All Data frame.
②
When a dialogue box asking “Remove All Data?” shows, choose ‘OK’.
③
Then, Progress window will appear and the process starts.
④
When all data are deleted, a dialogue box asking “Are you sure to remove log?” will pop up.
⑤
Choose ‘OK’ to delete all the recorded data as well as System Log.
When user finished all the necessary inputs to SYSTEM menu, please click (
) ‘OK’ on the bottom to go back to SETUP
screen.
NOTE
This might take a while to completely delete all data, and DVR will reboot after the data is cleared.
CAUTION
DELETED DATA CANNOT
BE RESTORED
.
4.2.2 Admin
Please click (
) SYSTEM>Admin and the following screen will appear.
Date
This menu will allow user to adjust the settings.
Please follow the procedure below for time adjustment.
①
Click (
) items (Y, M, D) to change. A designated item will be highlighted in a box (Y: Year, M: Month and D: Date).
②
Adjust the number by clicking (
)
▲
,
▼
buttons on the right-hand side.
③
Repeat the same procedure to change Y, M and D.
Time
This menu will allow user to adjust the current time. The adjustment procedure is same as of Date.
Date / Time