185
Then, user should be able to operate the PTZ camera with CP1300.
In PTZ mode, all buttons are operated according to texts written on each button. The functions are same as Front buttons of
DVR as follows:
-
# + “
“ will move to saved Preset point.
-
# + “
“ will save new Preset point under #.
-
Press “
“ to adjust the Focus.
-
Press “
“ to activate the Zoom.
WARNING
Depending on the Protocol being used by the Speed Dome camera, controlling camera menu will differ. Please check
Speed Dome camera manual.
12.5.3 SPD Control Mode(Speed Dome)
12.5.3.1 Connection
If the SPD Control Mode is selected followings will appear on Keyboard LCD:
Then, user should be able to operate the Speed Dome camera directly with CP1300.
NOTE
Please check Protocol and Baud rate before operating the Speed Dome Camera using CP1300.
12.5.3.2 Buttons
(PRESET):
Press number Key and PRESET then the camera will move to designated point.
(PATTERN):
Press number Key and PATTERN then the designated Pattern will run
(AUTO):
Press number Key and AUTO then the designated Auto will run.
(TOUR):
Press number Key and TOUR then the designated Tour will run.