![background image](http://html1.mh-extra.com/html/crary/tile-pro/tile-pro_owners-and-parts-manual_2679355012.webp)
Tile Plow Owner’s/Parts Manual
6
PN:90807-00 R090114
SAFETY
1. Always place all hydraulic controls in neutral before dis-
connecting from tractor or working on hydraulic system.
2. Make sure that all components in the hydraulic system
are kept in good condition and are clean.
3. Relieve pressure before working on the hydraulic
system.
4. Replace any worn, cut, abraded, flattened or crimped
hoses.
5.
Do not attempt any makeshift repairs to the hydraulic
fittings or hoses by using tape, clamps or cements.
The hydraulic system operates under extremely high-
pressure. Such repairs will fail suddenly and create a
hazardous and unsafe condition.
6. Wear proper hand and eye protection when searching
for a high-pressure hydraulic leak.
Use a piece of wood or cardboard
as a backstop instead of hands to
isolate and identify a leak.
7. If injured by a concentrated high-
pressure stream of hydraulic fluid,
seek medical attention immedi-
ately. Serious infection or toxic re-
action can develop from hydraulic
fluid piercing the skin surface.
8. Before applying pressure to the
system, make sure all components are tight and that
lines, hoses, and couplings are not damaged.
2.6 HYDRAULIC SAFETY
Think SAFETY! Work SAFELY!
1. Make sure you are in compliance with all local regula-
tions regarding transporting equipment on public roads
and highways.
2. It is the responsibility of the owner to know the lighting
and marking requirements of the local highway authori-
ties and to install and maintain the equipment to provide
compliance with the regulations. Add extra lights when
transporting at night or during periods of limited visibility.
2.7 TRANSPORT SAFETY
2.8 STORAGE SAFETY
2.9 ASSEMBLY SAFETY
1. Store the unit in an area away from human activity.
2.
Do not permit children to play on or around the stored
equipment.
3. Plow should be stored on level ground with the boot
NOT supporting the weight of the plow.
1. Assemble in an area with sufficient space to handle
the largest component and access to all sides of the
equipment
2. Use only lifts, cranes and tools with sufficient capacity
for the load.
3. When necessary, have someone assist you.
4.
Do not allow spectators in the working area.
5. Be sure to read the Maintenance Safety section.
Summary of Contents for Tile Pro
