Crane PULSE WATCH, User Manual

Page: 26 / 185

First use
26
Performing basic settings
After 90 seconds of button inactivity while
performing settings, the display will switch
back to the normal time indicator. All settings
performed until then will be saved. In this case,
start the setting process from the beginning.
− Hold the “MODE” button
5
down for approx. 3 seconds
until a signal beep sounds once.
Setting the time and date
The seconds will blink.
1. Set the seconds to zero with the “ST./STP.” button
2
or
“SELECT” button
4
.