3
2
English
Fig.1
Fig.2
Crown Operation
–Models Equipped with a Crown Cover–
<Opening and Closing the Crown Cover>
Insert your fingernail between the case and crown cover and open
the crown cover so that it opens to the outside.
* Always make sure to close the crown cover after operating the
crown.
<Important Point when Turning the Crown for Setting
Time and Date, Correcting Time Difference or Setting
Reference Position>
Although the crown can be operated by turn-
ing while pinching between your fingers or fin-
gernails (Fig. 1), the crown can be turned more
easily by turning while pressing against the
crown with the thick portion of your finger
(Fig. 2).
* Please refer to the manual for information
on the procedures for setting the time and
date, correcting time difference and setting
the reference position.
CONTENTS
1. Features
...................................................................................................
4
2. Before Using
............................................................................................
5
3. Setting the Time and Date
......................................................................
6
* Switching the Mode
* Setting the Time and Date
4. Correcting the Time Difference
..........................................................
14
5. Functions Unique to Solar-Powered Watches
...................................
20
* Insufficient Chargeing Warning Function
* Time Setting Warning Function
* Overcharging Prevention Function
* Power Save Function
6. General Reference for Charging Times
.............................................
25
7. Notes Regarding Handling of this Watch
..........................................
26
* Charging Precautions
8. Replacing the Secondary Battery
.......................................................
27
9. All-Reset
...............................................................................................
28
10. Reference Position Alignment
...........................................................
29
11. Precautions
.........................................................................................
32
12. Specifications
......................................................................................
38