31
30
Note (2):
The second hand will continue to remain stopped even if the crown is
returned to the normal position unless the reference position align-
ment procedure is performed.
6. After performing the reference position alignment procedure, properly reset the
time and date.
*The watch shows 12:00 AM for the time of reference position alignment after
the all-reset procedure has been performed. Set the time and date by referring
to "3. Setting the Time and Date" while being careful not to incorrectly set AM
and PM.
2. Align the date between the 31st and 1st and
the hour hand at the 12:00 position with the
crown pulled out to the first click.
(1) Turning the crown to the right causes
the hour hand to move forward.
(2) Turning the crown to the left causes the
hour hand to move backward.
3. The date moves with the hour hand. Con-
tinuously move the hour hand to set the date
between the 31st and 1st.
4. Align the hour hand at 12:00.
5. After each hand and the date have been set, return the crown to the normal
position.
Note (1):
It takes about 1 second for the watch to store the reference position in
memory. Once the reference position has been stored in memory, the
second hand will begin irregular two-second interval movement. The
reference position may not be stored in memory if the crown is oper-
ated before the start of irregular two-second interval movement after
returning the crown to the normal position.
CITIZEN
