Crane DEMING 7366N-411-16-32N Page 55 Installation And Operation Manual Download

Page: 55 / 56

START-UP REPORT

General Information

Pump Owner’s Name: __________________________________________________________

Address: ____________________________________________________________________

Location of Installation: _________________________________________________________

Contact Person: __________________________________Phone: _______________________

Purchased From: _____________________________________________________________

Nameplate Data

Pump Model #: ___________________ Serial #: _____________________________________

Part #: __________________________ Impeller Diameter: ____________________________

Voltage: _________Phase: _____ Ø Hertz: ____________Horsepower: _______________

Full Load Amps: ___________________ Service Factor Amps: __________________________

Motor Manufacturer: ___________________________________________________________

Controls

Control panel manufacturer: _____________________________________________________

Model/Part number: ____________________________________________________________

Number of pumps operated by control panel: ________________________________________

Short circuit protection? YES___ NO___

Type: _________________________________

Number and size of short circuit device(s): ___________ Amp rating: ___________________

Overload Type: _____________ Size: ______________ Amp rating: ___________________

Do protection devices comply with pump and motor Amp rating? YES___ NO___

Are all electrical and panel entry connections tight? YES___ NO___

Is the interior of the panel dry? YES___ NO___

Liquid level Control Brand and Model: ______________________________________________

Pre-Startup

All Pumps

Type of equipment: NEW___ REBUILT___ USED___

Condition of equipment at Start-Up: DRY___ WET___ MUDDY___

Was Equipment Stored? YES___ NO___

Length of Storage: ______________________

Liquid being pumped: __________________ Liquid Temperature: _____________________

Supply Voltage/Phase/Frequency matches nameplate? YES___ NO___

Shaft turns freely? YES___ NO___

Direction of rotation verifi ed for 3Ø motors? YES___ NO___

Debris in piping or wet well? YES___ NO___

Debris removed in your presence? YES___ NO___

Pump case/wet well fi lled with liquid before startup? YES___ NO___

Is piping properly supported? YES___ NO___

Non-Submersible Pumps

Is base plate properly installed / grouted? YES___ NO___ N/A___

Coupling Alignment Verifi ed per I&O Manual? YES___ NO___ N/A___

Grease Cup/Oil Reservoir Level checked? YES___ NO___ N/A___

A Crane Co. Company

Summary of Contents for DEMING 7366N-411-16-32N

























































Search results

Summary of Contents for DEMING 7366N-411-16-32N

Reviews:

Related manuals for DEMING 7366N-411-16-32N

Brands by name

Popular brands

Crane DEMING 7366N-411-16-32N, Installation And Operation Manual

Search results

Summary of Contents for DEMING 7366N-411-16-32N

Reviews:

Related manuals for DEMING 7366N-411-16-32N

Brands by name

Popular brands