Crane DEMING 7366N-411-16-32N Page 54 Installation And Operation Manual Download

Page: 54 / 56

RETURNED GOODS

RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”.

CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR.

Products

Returned

Must Be Cleaned, Sanitized,

Or Decontaminated As Necessary Prior To Shipment,

To Insure That Employees Will Not Be Exposed To Health

Hazards In Handling Said Material. All Applicable Laws

And

Regulations

Shall

Apply.

IMPORTANT!

WARRANTY REGISTRATION

Your product is covered by the enclosed Warranty.

To complete the Warranty Registration Form go to:

http://www.cranepumps.com/ProductRegistration/

If you have a claim under the provision of the warranty, contact your local

Crane Pumps & Systems, Inc. Distributor.

IMPORTANT!

WARRANTY INFORMATION

Warranty will be voided if the product

is serviced by any

Unauthorized Service Center.

Summary of Contents for DEMING 7366N-411-16-32N

























































Search results

Summary of Contents for DEMING 7366N-411-16-32N

Reviews:

Related manuals for DEMING 7366N-411-16-32N

Brands by name

Popular brands

Crane DEMING 7366N-411-16-32N, Installation And Operation Manual

Search results

Summary of Contents for DEMING 7366N-411-16-32N

Reviews:

Related manuals for DEMING 7366N-411-16-32N

Brands by name

Popular brands