4
E
N
G
L
I
S
H
inches
(mm)
DISCHARGE ..................
3” NPT, Vertical
LIQUID TEMPERATURE
104°F (40°C) Continuous
MOTOR HOUSING ........
Cast Iron ASTM A-48, Class 30
VOLUTE .........................
Cast Iron ASTM A-48, Class 30
SEAL PLATE .................
Cast Iron ASTM A-48, Class 30
IMPELLER:
Design ...........
2 Vane, Open with Pump out vanes
on Back side. Dynamically
balanced, ISO G6.3
Material ........
Cast Iron ASTM A-48, Class 30
SHAFT ............................
416 Stainless Steel
SQUARE RINGS ............
Buna-N
HARDWARE ..................
300 Series Stainless Steel
PAINT .............................
Air dry enamel, top coat
SEAL
Design ..........
Inboard, Single Mechanical
with
oil
fi
lled reservoir, secondary
exclusion
seal
Material ........
Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ................
25 Ft. (7.6m) Cord, Pressure
Grommet for sealing and strain relief
SPEED ...........................
1750 RPM, 60Hz (nominal)
UPPER BEARING:
Design ..........
Single Row, Ball, Oil Lubricated
Load .............
Radial
LOWER BEARING:
Design ..........
Single Row, Ball, Oil Lubricated
Load .............
Radial & Thrust
MOTOR:
Design ..........
NEMA L, Single phase,
NEMA B, Three Phase Torque Curve,
Oil Filled, Squirrel Cage Induction
Insulation ......
Class B
SINGLE PHASE .............
Permanent Split Capacitor (PSC)
Includes overload protection in motor
THREE PHASE ..............
200-240/480 is Tri voltage motor.
Requires overload protection
to be included in control panel
OPTIONAL EQUIPMENT:
Seal Material, Impeller Trims, Additional Cord,
N/C Temperature Sensors with cord for 3 Phase pumps
(Requires relay in Control Panel).
SECTION: A - PUMP SPECIFICATIONS:
26.00
(660)
9.74
(247)
12.62
(321)
6.32
(161)
8.25
(210)
2.15
(55)
16.71
(424)
