Barnes Pumps Control Panel Part No.
Number of pumps operated by control panel.
NOTE:
At no time should holes be made in top of control panel, unless proper sealing devices are utilized.
Control panel manufactured by others.
Company Name.
Model No.
Short Circuit Protection.
Type
Number and size of short circuit device(s)
Amp Rating
Overload Type
Amp Rating
Do protective devices comply with pump and motor amp rating?
Are all connections tight?
Is the interior of the panel dry?
Electrical Readings:
Single Phase:
Voltage supply at panel line connection, Pump Off, L1, L2.
Voltage supply at panel line connection, Pump On, L1, L2.
Amperage: Load connection, Pump On, L1.
L2
Three Phase:
Voltage supply at panel line connection, Pump Off, L1, L2.
L2-L3
L3-L1
Voltage supply at panel line connection, Pump On, L1, L2.
L2-L3
L3-L1
Amperage: Load connection, Pump On, L1.
L2
L3
Final Check:
Is pump seated on discharge properly?
Check for leaks?
Does check valves operate properly?
Flow; Does station appear to operate at proper rate?
Pump down time
Noise Level: High
Medium
Low
Comments:
Manuals:
Has operator received pump instructions and parts manual?
Has operator received electrical control panel diagram?
Has operator been briefed on Warranty?
Address of local Barnes Pumps representative/Distributor:
I have received the above information (Name of Operator):
Name of Company:
Date:
I Certify this report to be accurate (Name of Start-Up Person)
Employed By:
Date:
Date and Time of Start-Up
Present at Start-Up:
( ) Engineer:
( ) Operator:
( ) Contractor:
( ) Other
