77
5.2.5 Drive Model Selection
Inv Capacity [SER: Code No. 14]
(Factory Default: Depends on Model No.)
Range: See Table 5.2.2
The drive model selection for each drive is preset at the factory. This parameter must
be set correctly in order for the drive to calculate its output current. Table 5.2.2 cross
references the drive model number, horsepower, and vlotage rating, and lists the
default values for M-rated cur. [ADV: Code No. 31] and No-load cur. [ADV: Code No.
32].
Table 5.2.2: SV200 Part Number Cross Reference to Drive Model Selection
Model
Description
Part No.
FLA
NLA
3hp@230V
3 HP - 230 V
446485-10
9.6
2.8
5hp@230V
5 HP - 230 V
446485-11
15.2
4.4
7.5hp@230V
7.5 HP - 230 V
446485-12
22
6.6
10hp@230V
10 HP - 230 V
446485-13
28
8.4
15hp@230V
15 HP - 230 V
446485-14
42
12.6
20hp@230V
20 HP - 230 V
446485-15
54
16.2
25hp@230V
25 HP - 230 V
446485-16
68
20.4
30hp@230V
30 HP - 230 V
446485-17
80
24.0
3hp@460V
3 HP - 460 V
446485-20
4.8
1.4
5hp@460V
5 HP - 460 V
446485-21
7.6
2.2
7.5hp@460V
7.5 HP - 460 V
446485-22
11
3.3
10hp@460V
10 HP - 460 V
446485-23
14
4.2
15hp@460V
15 HP - 460 V
446485-24
21
6.3
20hp@460V
20 HP - 460 V
446485-25
27
8.1
25hp@460V
25 HP - 460 V
446485-26
34
10.2
30hp@460V
30 HP - 460 V
446485-27
40
12.0
For more information contact: Sievert Crane and Hoist, (708) 771-1600, [email protected], www.sievertcrane.com
