Crane Merchandising Systems COTI, Technical Manual

Page: 94 / 140

85 COTI / ICON
Se
cti
o
n
5
-
En
gi
n
e
er
’
s
P
ro
gr
am
Important : On no account should the first three codes be altered without first
consulting your supervisor or manager.
1. Enter Pin - this is the Supervisor ’ s pin enables the following pins to be changed.
2. Change Engineer PIN - this displays and enables the pin to be changed, for entry
into the Engineer ’ s program.
3. Change Operator PIN - this displays and enables the pin to be changed for entry
into the Operator ’ s program.
N.B. It is highly recommended the following two codes are changed on all machines.
4. Change Keyless Jugvend PIN - this displays and enables the pin to be changed for
the user to use a jug vend.
5. Change Keyless Freevend PIN - this displays and enables the pin to be changed for
the user to use Freevend.
5.13 Timed Events
This enables the creation, deletion and update of timed events that are run automatically
in the machine via the following menus.
1. Time of Day Events —This enables the setup of discounted vend, free vend and
inhibited vend periods.
2. Sanitation Events —This enables the setup of periods when the machine will
automatically flush through the water system.
3. Backup Events —This enables the machine to be programed to perform an
automatic backup of all user configurable settings and sales data stored in its
memory.
4. Power Saving Events —This enables the setup of periods when the machine enters
a power saving mode. In this mode the water in the boiler is not maintained at the
normal vend temperature, but at a lower temperature of 70°C.
The method for creating/updating a timed event is the same for all four event types. The
following example describes how the engineer can program the machine to free vend
specific drink selections between 10.30 am and 2:30 pm on week days.