Crane Merchandising Systems COTI, Technical Manual

Page: 24 / 140

15 COTI / ICON
Se
cti
o
n
2
-
In
sta
lla
ti
o
n
Safety First! The CO
2
bottle may be heavy. Always
follow the correct procedure when lifting heavy
objects.
3. Secure the CO
2
bottle with
the safety chain. Turn on
the supply from the bottle
and ensure that the
regulator (2) is indicating a
pressure of 35 PSI.
4. Place the carbonator
overflow pipe into the
waste bucket. Fill the
carbonator water bath with clean cold water until it
starts to flow from the overflow pipe.
5. Switch on the carbonator unit using the Cold Unit
switch located near the power supply.
6. Place the syrup containers in the bottom right - hand
side of the cabinet and insert the dip tubes into the
containers ensuring that the correct flavours
correspond to the drinks displayed on the display.
7. Prime the syrup selections ready for use by pressing
button 13 on the service keypad to display the
following screen.
N.B. Ensure that the waste bucket is empty and in
place before priming the pumps.
2