Crane Merchandising Systems COTI, Technical Manual

Page: 89 / 140

Technical Manual 80
Se
cti
o
n
5
-
En
gi
n
e
er
’
s
P
ro
gr
am
1. Install Language – to install a new language it must be
available on a suitable USB stick and file format.
2. Remove Languages – this removes current languages
installed on the machine. As a safe guard you cannot
remove all languages from the machine.
3. Service Application – this enables the selection of the
language that is used on all screens accessed by service
engineers.
4. User Interface – this enables the selection of languages that are available for
selection by the consumer (user). A default language can be selected with the
option to provide a further four languages that are available for the consumer to
select on the drink selection screen.
5.11.7 DTS
This menu enables the configuration of the data transfer standard to send audit data
relating to sales and events, stored in the machines memory, to a data carrier or other
device.
Data Transfer Standard (EVA - DTS): This is the standard that makes it possible to transfer
information from vending machines/payment systems to PC - based accounting/
management systems and/or the opposite way. It is important that all suppliers of
vending machines and payment systems agree to a common standard for the Electronic
Data Transfer because only this way the operator can be sure that all his equipment can
be read out and programmed by means of the same handheld device.
5.11.7.1 DTS Standby Mode
This indicates the current mode and is factory set to enable data transfer via:
1. DDCMP IrDA - data can be downloaded from the
machine using a hand held infra red DDCMP device.
2. DEX - data can be downloaded from the machine by
plugging a DEX enabled device into the DEX port (J16)
on the main control board, located on the rear of the
door
3. DDCMP Wired - data can be downloaded via a plugged
in DDCMP device.
5.11.7.2 DTS Audit List
This menu enables the selection of which data is transferred
from the machine to a DEX/DDCMP data carrier. All data and
events fields within a vending machine are assigned a unique
code determined by the DTS and these fields are available for
selection on this screen.