Crane Merchandising Systems COTI, Technical Manual

Page: 67 / 140

Technical Manual 58
Se
cti
o
n
5
-
En
gi
n
e
er
’
s
P
ro
gr
am
5.5.3.3 Augers
Use this option to test the correct operation of each individual ingredient motor. This test
causes the ingredient canister auger to turn, remove the canisters before starting the test
sequence.
Important: DO NOT place ingredient canisters on the
floor.
1. Each Auger on the machine is listed and can be
tested individually or by using the Testing option a
test sequence of each can be run.
2. An Abort option enables the Testing sequence to be
stopped at any time.
3. Refit the ingredient canisters on completion of the
test.
5.5.3.4 Whippers
Use this option to test the correct operation of each individual whipper motor, each
motor is run for 4 seconds.
1. Each Whipper on the machine is listed and can be tested individually or by using
the Testing option a test sequence of each can be run.
2. An Abort option enables the Testing sequence to be stopped at any time.
5.5.3.5 Test Grinder
Use this option to test the correct operation of the coffee bean grinder motor, it will run
for 4 seconds.
5.5.4 Vend Without Cup
This menu enables the engineer to test vend all of the drinks that are available from the
machine without dropping a cup, to ensure each drink is correctly dispensed.
A suitable container must be placed under the dispense position to receive the vend.
While the tests are running the
‘ test animation ’ accompanied by a Test Started message,
on a successful completion of the test the screen returns to the Vend Without Cup
screen.
1. Select the required drink to be tested.
2. The ingredient, milk and sugar strengths can be changed using the – and + to
change the values as required.
3. Select Start to start the vend process.
4. Each drink can be tested as required by repeating the procedure above.