3
EnglIsh
3/8" x 1"
HEX BOLT (D)
3/8" NYLOCK
NUT (M)
BEND
FACES
OUT (23)
BEND
FACES
IN
inStrUCtiOnS fOr CmX mODeL trACtOrS
Step 1: (fig. 1)
1. Attach an angle support bracket to the top holes in the
quick attach brackets using two 3/8" x 1" hex bolts (D)
and 3/8" flanged lock nuts (Y).
Do not tighten.
2. Attach an angle support bracket to the bottom holes in
the quick attach brackets using two 3/8" x 1" hex bolts
(D) and 3/8" Nylock Nuts (M).
Do not tighten.
Fig. 1
Step 2: (fig. 2)
1. Assemble the pivot support bracket to the slotted
angle support brackets using four 3/8" x 1" hex bolts
(D) and Nylock Nuts (M).
Do not tighten yet.
2.
Tighten
the 4 bolts fastening the slotted angle
support brackets to the quick attach brackets.
3.
Tighten
the 4 bolts fastening the pivot support
bracket to the slotted angle support brackets
4.
GO TO PAGE 7.
3/8" x 1"
HEX BOLT (D)
3/8" NYLOCK
NUT (M)
PIVOT SUPPORT
BRACKET
Fig. 2
Step 3: (fig. 3)
1. Assemble a shoulder bolt (I) and a 3/8" nylock nut (M)
to the front of the tractor frame on each side, unless a
shoulder bolt is already present.
SHOULDER BOLT (I)
3/8" NYLOCK
NUT (M)
3/8" x 3/4"
HEX BOLT (Z)
BLADE
MOUNTING
BRACKET (26)
Fig. 3
Step 4: (fig. 4)
1. Pull out on the attachment pins of the hitch assembly
and swing the top of the pins down away from the
holes they were in.
2. Hook the hitch assembly onto the shoulder bolts in the
side of the tractor frame.
3. Align the holes in the hitch assembly with the holes in
the tractor frame. Insert the attachment pins to lock
the hitch assembly in place.
4.
gO TO FIgURE 19
SHOULDER BOLT
ATTACHMENT PIN
Fig. 4
