Fig. Y
14
Filter Bag Installation (Fig. X)
A Filter Bag may be used in place of or in addition to the
Qwik Lock™ Cartridge Filter.
NOTE:
See Repair Parts List for Part Number.
NOTE:
When picking up dry debris a Filter Bag or
Cartridge Filter must be properly installed.
1. Filter Bag to be used to pick up dry debris only.
2. Correct positioning of Cardboard Collar is required to
assure proper seal.
3. Locate two Ribs on Inlet Tube, inside Drum.
4. Slide Cardboard Collar onto Inlet Tube and position
Cardboard Collar between the two Ribs.
5. With the Cardboard Collar securely installed, unfold
and position Filter Bag inside Drum.
Filter Bag Removal (Fig. Y)
1. Slide Cardboard Collar toward center of Vac Drum.
2. Remove Filter Bag from Vac Drum and discard.
3. Install new Filter Bag.
Filter Bag
WARNING:
To avoid health hazards from vapors or dust,
do not vacuum toxic, carcinogenic or other hazardous
materials such as asbestos, arsenic, barium, beryllium,
lead, pesticides or other health endangering materials.
!
Unfolded
Filter Bag
Drum
Cardboard
Collar
Fig. X
Inlet Tube
Cardboard
Collar
Filter Bag
Ribs (2)
Drum
CAUTION:
To avoid spilled debris, when picking up heavy or sharp
material, monitor bag volume and do not overfill.
!
Summary of Contents for CMXEVBE176560
Page 58: ...58 NOTES ...
Page 59: ...59 NOTES ...
