English
4
Magnets (Fig. A)
CAUTION:
When the LED light hangs by the magnet,
do not shake the LED light or the object from which
it hangs. Do not hang the work LED light overhead
or from anything that is not secure. Personal injury or
property damage may occur.
CAUTION:
Only use the magnet for hanging the LED
light. The magnet are not intended to support additional
weight. Do not attach or hang anything additional to the
LED light or risk of breakage may occur.
1. The CMMT25166 has a built in magnet
7
located at the
end of the housing
2
.
2. The magnet
7
is intended for catching small metal parts
such as screws and bolts and is also intended to hold the
light in place on solid metal surfaces.
OPERATION
CAUTION: Do not stare into the LEDs.
Serious eye
injury could result.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP:
In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
•
FOR YOUR sAFETY:
Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at
www.craftsman.com
/registration
Repairs
The work light is not serviceable. The LED light bulbs and
battery cannot be replaced by the user.
Accessories
WARNING:
Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this product
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be used
with this product.
There are no accessories for this product.
Cleaning
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
MAINTENANCE
Your CRAFTSMAN product has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care
and regular cleaning.
Multi Function Button (Fig. A)
The LED lights have one brightness setting.
1. Press the multi function button
1
once to activate the
side LED
5
.
2. Press the multi function button
1
a second time to
activate the spot light LED
6
.
3. Press the multi function button
1
a third time to turn the
LEDs OFF.
The RBRC® Seal
Please take your
CRAFTSMAN
product
with a spent battery to an authorized
CRAFTSMAN
service center or to your local
retailer for recycling. In some areas, it is
illegal to place spent battery packs in the trash.
You may also
contact your local recycling center for information on where
to drop off the spent battery pack. Do not place in curbside
recycling. For more information visit
www.call2recycle.org
.
or call the toll free number in the RBRC® Seal.
RBRC® is a registered trademark of Call 2 Recycle, Inc
.
SPECIFICATIONS
CMMT25166
Voltage
V
DC
5
Battery type
10800
Li‑Ion
Lumens
Side LED
lm
300
Spot light LED
lm
180
LUX at two meters
Side LED
lx
35
Spot light LED
lx
260
Run Time When Fully Charged
Side LED
hour
2
Spot light LED
hour
3
Charging temperature range
40 °F – 104 °F
4 °C – 40 °C
Operating temperature range
14 °F – 140 °F
‑10 °C – 60 °C
Storage temperature range
14 °F – 140 °F
‑10 °C – 60 °C
