SERVICE AND ADJUSTMENT
22
1740309SM
HOW TO REMOVE THE TOP COVER
1. Remove the
discharge chute.
See
“How To Remove The Discharge
Chute”.
2. Remove the fuel cap.
3. Remove the two
bolts (A)
and nuts
from the front of the
top cover.
4. Remove the two
bolts (B)
and nuts
from the left and right side of the
top cover.
5. Remove the eight
screws (C)
on
the left and right side of the
top
cover.
6. Remove the five
screws (D)
from
the top portion of the control panel.
7. Carefully pull the rear of the
top
cover
up and over the gas tank.
8. To install the
top cover,
reverse the
above steps.
HOW TO REMOVE THE BELT COVER
1. Remove the
bolts (E)
and nuts
that
hold the
belt cover
to the auger
housing.
2. If the top cover has not been re-
moved, then remove the
screws
(C)
that attach the
belt cover
to the
top cover
.
3. Remove
screw (F)
that holds the
belt cover
to the
bottom cover.
4. To remove, hold the bottom portion
of the
belt cover
and pull down and
out.
5. To install the
belt cover,
reverse the
above steps.
Figure 22
BeltCover
A
A
Top Cover
B
B
B
C
C
C
C
C
D
E
F
Summary of Contents for 536.881501
Page 50: ...50 1740309SM ...
Page 80: ......
