MAINTENANCE
18
1740309SM
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you
complete regular
service.
Before
Each
Use
Often
Every
8
Hours
Every
25
Hours
Every
50
Hours
Every
100
Hours
Each
Season
Before
Storage
Check Engine Oil Level
√
√
Change Engine Oil
√
Tighten All Screws and
Nuts
√
√
Check and Clean Spark
Plug
√
Replace Spark Plug
√
Clean and Inspect
Spark Arrestor
√
Lubricate Chute Control
Flange
√
Check Fuel
√
Check Adjustment of
Auger Control Cable
√
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does
not cover items that have been sub-
jected to operator abuse or negligence.
To receive full value from the warranty,
the operator must maintain the snow
thrower as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
snow thrower.
Maintenance, replacement, or repair of
the emission control devices and sys-
tems can be performed by any non-road
engine repair establishment or individu-
al. Regular maintenance will improve the
performance and extend the life of the
engine.
WARNING: Do not strike the
flywheel with a hammer or a
hard object. If done, the fly-
wheel can shatter during operation.
Do not tamper with the governor
spring, links or other parts to in-
crease engine speed.
AFTER EACH USE
•
Run the machine to clear the auger
of snow.
•
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
•
Check for any loose or damaged
parts.
•
Tighten any loose fasteners.
•
Check and maintain the auger.
•
Check controls to make sure they
are functioning properly.
•
If any parts are worn or damaged,
replace immediately.
LUBRICATION BEFORE STORAGE
Figure 15
Lubricate chute
control flange. Lubricate
flange with a clinging type
grease such as Lubriplate.
Summary of Contents for 536.881501
Page 50: ...50 1740309SM ...
Page 80: ......
