Housing Clip (#9)
Motor Housing Access
To access motor housing, take out the four screws in the top motor housing
(#8). Save the screws. Raise the top motor housing and decor cover cap up
the downrod. Secure both pieces by attaching the housing clip (#9)
underneath the top motor housing by clipping it on and tightening the set
screw. This will give access to the blade assembly area.
14
Electrical Connections
Connect black fan wires to black outlet wire. Connect white fan wire to
white outlet wire and green grounding lead wire from the grounding
conductor to the supply circuit (see figure A). Use wire connectors provided
with your fan. No loose strands or loose connections should be present.
Turn splices upward and carefully push all wiring into outlet box. When
wall switches are employed, switches should be UL listed for use with
ceiling fan.
Fan and lights
controlled by remote
control unit.
Ground
Black
White
Black
White
Green
CAUTION:
Always turn off power at breaker before attempting any wire
connections.
