Craftex CX800, User Manual

Page: 4 / 26

4
Like all power tools and machinery, proper safety and attention must be adhered to.
There is danger associated with using any tool or machine so pay careful attention
each and every time you use your tool. If you are not familiar with the operations of a
lathe, you should obtain the advice and/or instructions from a qualified professional.
Read this operation manual carefully
and understand it before operating the
lathe.
Do not over-reach . Keep proper footing
and balance at all times.
Maintain machine in top condition.
Keep machine clean for best and safest
performance. Follow instructions for
lubrication and changing accessories.
Disconnect the machine from power
source before servicing, changing
accessories, and making any
adjustments.
To avoid accidental starting , make
sure the switch is in the OFF position
before plugging in the power cord.
Never leave the lathe running and
unattended. Turn the power OFF. Do
not leave the machine until it comes to a
complete stop.
Start and stop the machine yourself .
To avoid accidental injuries make sure
not to have anybody help you do this.
Always wear dust mask operation
creates a lot of sawdust and/or chips.
Always operate the tools in a well-
ventilated area and make sure to use a
proper dust collection system for
optimum dust removal.
Turn OFF then machine before making
any adjustments or servicing.
Do not attempt to measure the work-
piece size while the machine is running.
Make sure the work-piece is clamped
securely between the centers before
starting the machine.
Only use correct size centers.
After adjusting or servicing the
machine, remember to remove all
wrenches and other tools from the
machine.
Make sure you have read and
understood
the instructions given in
this manual and you are familiar with
your lathe before operating it. If you fail
to do so, serious injury could occur.
CX800 – WOOD LATHE WITH VARIABLE SPEED
SPECIFIC SAFETY INSTRUCTIONS
WARNING
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.