Craftex B2062L, Owner'S Manual

Page: 18 / 30

18
MAINTENANCE
Before performing any maintenance be certain that the saw is
disconnected from any power source.
* Clean off any preservative on the saw components with mineral spirits or varsol
and wipe dry.
*Avoid getting any of the cleaning fluid on rubber parts as it may permanently
damage them.
*Use a mild soap and warm water on plastic or rubber components.
*The unpainted surfaces (saw table top etc) should be protected with a coat of
paste wax or Top Cote®. Apply the wax/cote and then buff dry.
*Regularly vacuum all sawdust from the saw’s interior.
*Lubricate the trunion and worm gears with white grease on a regular basis.
*Vacuum the motor through the openings on a regular basis.
*Regularly lubricate all moving parts, internal bearing and wear surfaces.
*Check drive belts for wear on a regular basis and replace if they show signs of
wear.
*Check that the blade guard and anti kickback pawls operate properly.