Crafco MODEL 30 PAVEMENT ROUTER, Parts Manual

Page: 26 / 63

26
SERVICE AND MAINTENANCE INSTRUCTIONS (CONT’D)
MODEL 30 PAVEMENT ROUTER
After 2 hours of operation check and tighten the V-belts as required. To tighten belts, adjust
jam nuts under engine mount. (Figure 6)
Figure 6
CAUTION:
Do not over-tighten belts as damage will occur to belts and
bearings. Belts that are too loose will shorten the life of the belts and
sheaves. Recheck belt tension after 8 hours and every 40 hours
thereafter. When installing new belts do not attempt to stretch over
sheaves. Always replace both belts and inspect sheaves for wear.
Clean machine each day using compressed air or by wiping with rags, especially in area of
engine cooling fins.
Periodically inspect the in-line fuel filter and replace when dirty. Use Crafco P/N 31331.
Always use genuine Crafco cutters and other replacement parts. Failure to do so will void
warranty and possibly cause damage to machine or injury to operator.