Crafco MODEL 30 PAVEMENT ROUTER, Parts Manual

Page: 6 / 63

6
SAFETY PRECAUTIONS
MODEL 30 PAVEMENT ROUTER
1. Eye and ear protective devices along with a dust mask are required when operating the
CRAFCO MODEL 30 PAVEMENT ROUTER.
2. Observe all CAUTION AND WARNING signs posted on machine.
3. Care should be taken when operating machine on grades. It is usually best to operate
the machine going uphill, rather than downhill.
4. To stop or slow machine, push down on handle and/or release the clutch handle.
5. When cleaning cracks and joints near moving traffic, always move in a direction away
from traffic to protect the operator.
6. Never allow fatigued operators to run the machine. Due to the nature of running this
machine, the crew leader should rotate operators as they see fit according to thier
performance.
7. Tires should be inflated to 45 psi to allow machine to roll easily.
8. Never operate the router without belt guard in place.
9. Never transport the router with the engine running.
10 Never exceed maximum recommended engine RPM.
11. Never leave router unattended while engine is running.
12. Never stand on any part of the machine.
13. The only operating position is behind the pavement cutter with both hands on the
handle.
14. Wear long pants, work gloves and heavy leather boots or shoes.
15. Tighten all bolts and screws every 100 hours of operations.
Include these Safety Precautions with the Dust Control Router
16. Do not operate router without hose attached to blower.
17. Do not operate router without hose attached to Cutter Head Dust Shroud.
18. Do not route without Cutter Head Dust Shroud in place.