Crafco MODEL 30 PAVEMENT ROUTER, Parts Manual

Page: 20 / 63

20
OPERATING PROCEDURE (Continued)
MODEL 30 PAVEMENT ROUTER
NOTE: STEP 19 APPLIES ONLY TO THE SELF-PROPELLED
ROUTER
21. Reduce engine to idle, stand at the operators position, raise the handle sightly so the
router is not resting on the skid plate. Pull up on the right hand drive handle to engage
the self-propelled drive system and walk behind the router towards the next distressed
area and release the drive handle when your ready to stop moving.
STORING THE MACHINE
MODEL 30 PAVEMENT ROUTER
CRAFCO Model 30 Pavement Router and Self-Propelled Router.
DO NOT rest the weight of the machine on the rubber rock deflector or rubber will become
deformed, causing them not to function properly. Store with engine in a near level position.
Dust Control Router
DO NOT leave the machine resting on the seal brushes or the brushes will become deformed,
causing them not to function properly. The dust collection bag should be stored in a covered
area out of direct sunlight and away from moisture. Store the dust collection bag in a place
where it won’t be inadvertently torn or damaged.