46
Figure 5-3 Inverter system check ongoing
Standby
>>>>>>
Figure 5-4 Inverter system in standby mode
(a) (b)
Figure 5-5 Default display interface for normal operation
SPICommErr
Figure 5-6 Fault indication interface
LCD screen will display different mode interfaces based on the operation
modes of the inverter. There are four operation modes: startup system check
mode (as shown in Figure 5-3), stand-by mode (as shown in Figure 5-4),
normal operation mode (as shown in Figure 5-5, the switching time between (a)
and (b) is 5 seconds), and fault mode (as shown in Figure 5-6).
The default indication interface mainly indicates PV voltage, PV current,
Summary of Contents for SC14KTL-DO/US-208
Page 4: ......
