34
Standby
>>>>>>
Figure 4-3 Inverter system in standby mode
(4) Fault mode, as shown in Figure 4-4:
The inverter will disconnect from the power grid and turn into fault mode
when the inverter or power grid fails. Check the specific cause through
“Troubleshooting table” (Table 4-1) in terms of the fault message displayed on
the LCD and eliminate the fault according to the instructions.
SPICommErr
Figure 4-4 Fault indication interface
4.4 Grid connection and power generation
The grid connection and power generation process of CPS
SC14KTL-DO/US-208 is automatic. It will check constantly whether AC power
grid meets the grid connection and power generation conditions. At the same
WARNING:
All the installation and cable connections should be performed only by
qualified technical personnel. Disconnect the inverter from PV
modules and the Power Grid before maintaining and operating the
equipment.
Summary of Contents for SC14KTL-DO/US-208
Page 4: ......
