4
CONTROLS AND FEATURES - BLACKMAX WIRELESS DIGITAL MANIFOLD
1.
[ON/OFF]
- Press and hold to turn On or Off
2.
[SET]
- For entering programed values
3.
[REF]
(Refrigerant) - Scrolls through 5 pre-selected “favorite” or commonly used
refrigerants
4.
[MODE]
- Programming (change English vs. Metric units; Turn Auto-Power OFF)
5.
[SH/SC]
(Superheat, Subcool)
- Controls display of Superheat/ Subcool, Saturation
temperatures, and Delta T.
6.
[TEST]
- Press to obtain either “Pressure Hold” or “Vacuum Hold” tests.
7.
[CLR]
(Clear)- Sets pressure to zero point . Also ends any test in process.
8.
[BACKLIGHT]
- Press once to turn light On or Off
9.
HIGH SIDE VALVE
- Controls flow to right side ¼” SAE male port
10.
REFRIGERANT VALVE (MD100 Series Only)
- Controls flow through RIGHT MIDDLE
¼” SAE Male Port.
11.
SIGHTGLASS
- Monitor refrigerant flow
12.
VACUUM VALVE (MD100 Series Only
)- Controls flow through LEFT MIDDLE 3/8”
SAE PORT.
13.
LOW SIDE VALVE
- Controls flow to LEFT SIDE ¼” SAE Port.
14.
CENTER PORT (MD50W Series Only)
- A ¼” SAE Male “T” port used as common
connection to vacuum pump, recovery unit or refrigerant supply tank. The addition
of a ¼” SAE Male “T” fitting with valve core allows for a dual hook up between
vacuum pump and refrigerant supply tank.
15.
9V DC Charger Port
- Connection for Accessory MDXBK
16.
Vacuum Gauge Accessory Port
- Connection for accessory MDXVG
17.
Thermistor Sensors
- Ideal for taking Superheat and Subcool true temperatures on
round pipes, at any angle
18.
Swivel Hook -
Heavy Duty 360°
19.
Battery Compartment
- Uses 4 AA batteries
20.
Hose Hangers
- For securing ends of unused hoses
21.
Connection Points-
For (2) thermistor sensors
22.
Storage Posts
- For thermistor sensors
23.
SAE Connection Ports
- For SAE Hoses
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
